Vivotek FD836BA-EHTV User Manual Download Page 337

Page: 337 / 339

VIVOTEK

User's Manual - 337

Technical Specifications

Model

FD836BA-HTV: Vari-focal, P-iris, Remote Focus

FD836BA-EHTV: Vari-focal, P-iris, Remote Focus,
Extreme Weather

FD836BA-HVF2: Fixed-focal

FD836BA-EHVF2: Fixed-focal, Extreme Weather

System Information

CPU

Multimedia SoC (System-on-Chip)

Flash

1Gb

RAM

2Gb

Camera Features

Image Sensor

1/2.7" Progressive CMOS

Maximum Resolution

1920x1080 (2MP)

Lens Type

FD836BA-HTV/EHTV: Vari-focal

FD836BA-HVF2/EHVF2: Fixed-focal

Focal Length

FD836BA-HTV/EHTV: f = 2.8 ~ 12 mm

FD836BA-HVF2/EHVF2: f = 2.8 mm

Aperture

FD836BA-HTV/EHTV: F1.8 ~ F2.85

FD836BA-HVF2/EHVF2: F1.8

Auto-iris

P-iris (FD836BA-HTV/EHTV)

Field of View

FD836BA-HTV/EHTV:

42° ~ 105° (Horizontal)

24° ~ 57° (Vertical)

49° ~ 131° (Diagonal)

FD836BA-HVF2/EHVF2:

110° (Horizontal)

64° (Vertical)

135° (Diagonal)

Shutter Time

1/5 sec. to 1/32,000 sec.

WDR Technology

WDR

Day/Night

Removable IR-cut filter for day & night function

Minimum Illumination

FD836BA-HTV/EHTV:

0.12 Lux @ F1.8 (Color)

0.001 Lux @ F1.8 (B/W)

FD836BA-HVF2/EHVF2:

0.15 Lux @ F1.8 (Color)

0.001 Lux @ F1.8 (B/W)

Pan/Tilt/Zoom
Functionalities

ePTZ:

48x digital zoom (4x on IE plug-in, 12x built in)

IR Illuminators

Built-in IR illuminators, effective up to 30 meters

with Smart IR

IR LED*8

On-board Storage

Slot type: MicroSD/SDHC/SDXC card slot

Seamless Recording

Video

Compression

H.264 & MJPEG

Maximum Frame Rate

30 fps @ 1920x1080

In both compression modes

Maximum Streams

4 simultaneous streams

S/N Ratio

70dB

Dynamic Range

110dB

Video Streaming

Adjustable resolution, quality and bitrate
Smart Stream

Image Settings

Adjustable image size, quality and bit rate; Time
stamp, text overlay, flip & mirror; Configurable
brightness, contrast, saturation, sharpness,
white balance, exposure control, gain, backlight
compensation, privacy masks; Scheduled profile
settings, 3D noise reduction, video rotation,
defog

Audio

Audio Capability

Two-way Audio (full duplex)

Compression

G.711, G.726

Interface

External microphone input

External line output

Network

Users

Live viewing for up to 10 clients

Protocols

IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/
RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS,
PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP,
SSL, TLS

Interface

10 Base-T/100 BaseTX Ethernet (RJ-45)

*It is highly recommended to use standard
CAT5e & CAT6 cables which are compliant with
the 3P/ETL standard.

ONVIF

Supported, specification available at
www.onvif.org

Intelligent Video

Video Motion Detection

Five-window video motion detection

VCA

Line crossing detection, field detection, loitering
detection

*Available per project request.

Alarm and Event

Alarm Triggers

Motion detection, manual trigger, digital input,
periodical trigger, system boot, recording
notification, camera tampering detection, audio
detection

Alarm Events

Event notification using digital output, HTTP,
SMTP, FTP, NAS server and SD Card

File upload via HTTP, SMTP, FTP, NAS server and
SD card

General

Smart Focus System

Remote Focus (FD836BA-HTV/EHTV)

Connectors

RJ-45 cable connector for Network/PoE
connection

Audio input

Audio output

DC 12V power input

Digital input*1

Digital output*1

LED Indicator

System power and status indicator

Power Input

DC 12V

FD836BA-HTV/HVF2: IEEE 802.3af/at PoE Class 0

FD836BA-EHTV/EHVF2: IEEE 802.3at PoE Class 4

Power Consumption

FD836BA-HTV: Max. 13 W

FD836BA-EHTV/EHVF2: Max. 25 W (Heater on)

FD836BA-HVF2: Max. 9 W

Dimensions

Ø 155 x 103 mm

Weight

920 g

Casing

Weather-proof IP66-rated housing

Vandal-proof IK10-rated metal housing

Safety Certifications

FD836BA-HTV/EHTV:
CE, LVD, FCC Class A, VCCI, C-Tick, UL
FD836BA-HVF2/EVF2:
CE, LVD, FCC Class A, VCCI, C-Tick

Operating Temperature

FD836BA-HTV/HVF2:

Starting Temperature: -10°C ~ 50°C (14°F ~ 122°F)

Working Temperature: -20°C ~ 50°C (-4°F ~ 122°F)

FD836BA-EHTV/EHVF2:

Starting Temperature: -40°C ~ 50°C (-40°F ~ 122°F)

Working Temperature: -50°C ~ 50°C (-58°F ~
122°F)

Warranty

FD836BA-HTV/EHTV: 36 months

FD836BA-HVF2/EHVF2: 24 months

System Requirements

Operating System

Microsoft Windows 7/8/Vista/XP/2000

Web Browser

Mozilla Firefox 7~43 (streaming only)

Internet Explorer 7/8/9/10/11

Other Players

VLC: 1.1.11 or above

Quicktime: 7 or above

Included Accessories

User's manual, quick installation guide,
Installation Wizard 2, VAST 32-channel recording
software

Others

Quick installation guide, warranty card,
alignment sticker/desiccant bag, screw pack

Dimensions

Ø163 mm

m
m

Summary of Contents for FD836BA-EHTV




















































































































































































































































































































































Search results

Summary of Contents for FD836BA-EHTV

Reviews:

Related manuals for FD836BA-EHTV

Brands by name

Popular brands

Vivotek FD836BA-EHTV, User Manual

Search results

Summary of Contents for FD836BA-EHTV

Reviews:

Related manuals for FD836BA-EHTV

Brands by name

Popular brands