Vivotek FD8166A-N User Manual Download

Page: 307 / 318

VIVOTEK

User's Manual - 307

For delete selected lens configuration:

http://<

servername

>/cgi-bin/admin/update_lens.cgi?delete_lens=<value>

PARAMETER

VALUE

DESCRIPTION

value

Available lens name.

Please refer to:

lens_default_i<0~(n-1)>_name

lens_user_i<0~(n-1)>_name

n is a positive integer.

Method:

POST

Syntax:

For upload user-defined lens configuration:

http://<

servername

>/cgi-bin/admin/update_lens.cgi?upload_lens

Post data:

upload_lens_profile_input = <file name>\r\n

\r\n

Server will accept the file named <file name> to upload the lens profile to camera.

8.26

Media on demand

(capability.localstorage.modnum > 0)

Media on demand allows users to select and receive/watch/listen to metadata/video/audio contents on demand.

Note:

This request requires Viewer access privileges.

Syntax:

rtsp://<servername>/mod.sdp?[&stime=<value>][&etime=<value>][&length =<value>][&loctime

=<value>][&file=<value>][&tsmode=<value>]

PARAMETER

VALUE

DEFAULT

DESCRIPTION

stime <YYYYMMDD_HHMMSS.MMM> N/A

Start time.

etime <YYYYMMDD_HHMMSS.MMM> N/A

End time.

length

N/A

The length of media of interest.

The unit is second.

loctime

Specify if start/end time is local time format.

1 for local time, 0 for UTC+0

file

N/A

The media file to be played.

Summary of Contents for FD8166A-N































































































































































































































































































































Search results

Summary of Contents for FD8166A-N

Reviews:

Related manuals for FD8166A-N

Brands by name

Popular brands

Vivotek FD8166A-N, User Manual

Search results

Summary of Contents for FD8166A-N

Reviews:

Related manuals for FD8166A-N

Brands by name

Popular brands