VIVOTEK
User's Manual - 171
66
iris
auto
Let the Network Camera control iris size.
open
Manually control the iris for bigger size.
close
Manually control the iris for smaller size.
speedlink
0 ~ 4
Issue speed link command.
gaptime
0~32768
The gaptime between two consecutive ptz commands for
device. (unit: ms)
return
<return page>
Redirect to the page
<return page>
after the parameter is
assigned
.
The
<return page>
can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.
8.10 ePTZ Camera Control (capability.eptz > 0)
Note:
This request requires camctrl privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>] – Move home, up, down, left, right
[&auto=<value>] – Auto pan, patrol
[&zoom=<value>] – Zoom in, out
[&zooming=<value>&zs=<value>] – Zoom without stopping, used for joystick
[&vx=<value>&vy=<value>&vs=<value>] – Shift without stopping, used for joystick
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>] – Click on
image
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=
<
value
>
] ] – Set
speeds
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=0&move=right
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=1&vx=2&vy=2&vz=2
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=1&x=100&y=100&
videosize=640x480&resolution=640x480&stretch=0
PARAMETER VALUE
DESCRIPTION
channel
<0~(n-1)>
Channel of video source.
