12
IV-1-2. Pendant Mount with Pendant Pipe: AM-116/AM-117 & AM-118
Below are the sample procedures using a pendant head and pendant pipe:
1. Determine a hard surface ceiling location, and use the alignment sticker to mark the
positions where holes will be drilled to secure the pendant head. Hammer the anchors
into the ceiling.
Note that mounting holes should be 10mm in diameter and 60mm deep. The included
screws are M6.2 x75mm.
2. Install a 20cm or 40cm pendant pipe (AM-
116 or AM-117) by turning it clockwise
to the pendant head, and secure the
connection using an included 3mm hex
wrench.