4
Install the IR illuminator behind your network camera, i.e., FD8362/FD8362E. Orient its
shooting angle after you slightly loosened the ball swivel screws. Secure the illuminators'
shooting angle by fastening socket screws on the ball swivels.
If you drilled a hole on the wall, you can pass power lines through the hollow of the
illuminator bracket and then through the hole.
Camera
Illuminator bracket
* The IR tube housings have been
removed from this drawing for
simplicity sake.
Mounting hole
Mounting hole
180.6mm
271.3mm
Near View Plane
Far View Plane
39.6°
118.9°
View Plane
Max. 40m
60° projection angle
When planning the surveillance area, take into account the achievable distance. Optimal
results can be achieved by setting up at night and observing the results on a management
session screen. Adjust the illuminators' shooting angles so that the camera's field of view
is correctly lit..