Vivotek AE2101, User Manual

Page: 5 / 124

5
English
Installation Suggestions V
If you plan to install this camera enclosure into a tropical, sea coastal, or an environment
where salt water or corrosive industrial waste water/moist are present, please seal each
stainless steel screws and fittings with a silicon grease compounds. This will help prevent
electrolysis to occur and extend the life span of the camera and housing.
IMPORTANT!
1. Disconnect devices: A readily accessible disconnect device in the building installation
wiring should be incorporated.
2. Electrical Connection: Only a qualified electrician is allowed to make electrical
connections.
Features
Model Name
Heater:
On at 18
O
C
Off at 28
O
C
Blower
On at 35
O
C
Off at 25
O
C
PSU
(Power Supply Unit)
12VDC/24VAC 12VDC 080 324
080/F
-
• •
-
080/HF
• • •
-
324/HF
• •
-
•
1. 080: [90~240VAC input (+/-10%), 4x12VDC output, 3.5A]
2. 324 (24VAC input, 4x12VDC output, 3.5A)
Below are AC power connections to the FTB. 1 connector.
AC Power Connection
AC 24V Input
AC 24V Input
Ground
Green Line