7
English
2.
Prepare power wires, a ground wire, and a CAT5e Ethernet cable. Pass them through
the PG16 waterproof connectors and its waterproof components.
Ethernet cable Ø4 ~ 6.5mm
Power wires
Note that some cables are connected when shipped. You do not need to connect heater,
blower, and the front IR powere wires.
o
O
g
B
b
G
br
BR
1
2
3
4
5
6
7
8
o: white/orange stripe
O: orange solid
g: white/green stripe
B: blue solid
b: white/blue stripe
G: green solid
br: white/brown stripe
BR: brown solid
You may need to remove the RJ45 connector, and use a crimping tool to connect the
Ethernet wires to an RJ45 connector inside the enclosure. Use an Ethernet cable of the
width of 5 ~ 6.5mm.
3.
When done, tighten up and install the waterproof connectors.
IMPORTANT:
1. Recommend to cover the ethernet or power cable with stainless steel tube in order to
prevent the corrosion of cable.