VIVOTEK
User's Manual - 225
* This is kept for compatibility.
camctrl_privilege
<boolean>
0/7
Indicate whether to support “Manage
Privilege” of PTZ control in the security page.
1: support both /cgi-bin/camctrl/camctrl.cgi
and /cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
This is equivalent
to"capability_camctrl_c0_privilege".
* This is kept for compatibility.
uart_httptunnel
<boolean>
0/7
Indicate whether to support HTTP tunnel for
UART transfer.
transmission_mode Tx,
Rx,
Both
0/7
Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
network_wire
<boolean>
0/7
Indicate whether to support Ethernet.
network_wireless
<boolean>
0/7
Indicate whether to support wireless.
network_dualmode
<boolean>
0/7
Indicate whether network dual mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when the version
number (httpversion) is equal or greater than
0305a.
wireless_s802dot11b
<boolean>
0/7
Indicate whether to support wireless
802.11b+.
wireless_s802dot11g
<boolean>
0/7
Indicate whether to support wireless 802.11g.
wireless_s802dot11n
<boolean>
0/7
Indicate whether to support wireless 802.11n.
wireless_beginchannel
1 ~ 14
0/7
Indicate the begin channel of wireless network
wireless_endchannel
1 ~ 14
0/7
Indicate the end channel of wireless network
wireless_encrypt_wep <boolean>
0/7 Indicate whether to support wireless WEP.
wireless_encrypt_wpa <boolean>
0/7 Indicate whether to support wireless WPA.
wireless_encrypt_wpa2 <boolean>
0/7
Indicate whether to support wireless WPA2.
wireless_apmode_enable
<boolean>
0/7
Indicate whether wireless AP mode is
supported.
