VivoLink VLSC262, User Manual, Page: 34 / 36

6x1 4K Presentation Switcher with HDBaseT
31
7.6. Special Commands
Note:
The below commands don’t need ending mark.
Command Description
Command Example and
Feedback
>SetDisplayInputSend
Char_[Param]:XXXX
Set the ASCII
“Display Input Select”
command "XXXX" to be sent to display
device when power on the switcher.
[Param] = 1~5 (Baud rate of RS232 port)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
XXXX= ASCII data to be sent (Up to 48
characters).
>SetDisplayInputSendCha
r_5:1234567
<Baudrate: 9600
<Display input select to
send:1234567
>SetDisplayInputSend
Hex_[Param]:XX XX
Set the HEX
“Display Input Select”
command "XX XX" to be sent to display
device when power on the switcher.
[Param] = 1~5 (Baud rate of RS232 port)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
XX XX= HEX data to be sent (X = 0~9, A~F
and up to 20 XX).
>SetDisplayInputSendHex
_5:30 31 32 33
<Baudrate: 9600
<Display input select to
send HEX:30 31 32 33
>SetPowerOnSendCh
ar_[Param]:XXXX
Set the ASCII “Power On” command
"XXXX" to be sent to display device when
power on the switcher.
[Param] = 1~5 (Baud rate of RS232 port)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
XXXX= ASCII data to be sent (Up to 48
characters).
>SetPowerOnSendChar_5
:1234567
<Baudrate: 9600
<Power on to
send:1234567
>SetPowerOnSendHex
_[Param]:XX XX
Set the HEX “Power On” command "XX
XX" to be sent to display device when
power on the switcher.
[Param] = 1~5 (Baud rate of RS232 port)
1 - 115200
>SetPowerOnSendHex_5:
30 31 32 33