Compact Scaler Switcher (with PoH)
4
2.2 Rear Panel
①
INPUTS
Video input ports: 1 HDMI/MHL input, 2 HDMI inputs, 1 DP and 1 VGA
Audio input ports: 1 DP external audio input and 1 VGA auxiliary audio input.
②
OUTPUTS
HDMI output: HDMI video output port
③
MIC INPUT
MIC audio port: connect to Microphone.
Dial switch: including 3 level
48V phantom power mode (connect with condenser microphone);
MIC mode (connect with dynamic microphone);
LINE mode (connect with wireless microphone or line audio).
④
CONTROL
RES RESET: press this button to reset the output resolution to 1280×720p, or
activate HDMI output when they are closed.
IR EYE: Connect with IR receiver (with carrier wave only) to receive IR signal
send by IR remote to control this Scaler Switcher.
FIRMWARE: Type-A USB port for updating system firmware or loading
customized EDID data.
RS232: Serial port, 3-pin phoenix connector, connect with a control device
(such as PC) to control the Scaler Switcher.
TCP/IP: Ethernet port, connect with PC to control the Scaler Switcher via
GUI.
⑤
AUDIO OUT
Audio output port, the audio comes from the input audio corresponding to the
selected video source and is mixed with MIC audio.
⑥
DC 24V
Power port, connect with DC 24V power adapter.
Note:
Pictures shown in this manual are for reference only.
DC 24V
48V
LINE
IR EYE
MIC INPUT
MIC
FIRMWARE
AUDIO OUT
L
R
RES RESET
RS232
Tx
Rx
INPUTS
OUTPUT
3-HDMI
2-HDMI
1-HDMI / MHL
4-DP
5-VGA
HDMI
CONTROL
1
2
3
4
5
6
