5
ARC Mode
The front panel of receiver provides a buttons to enable or disable ARC mode, as
below figure shows:
Press the button with paper clip or other sharp tool to enable the ARC mode, and then
the left LED illuminates blue. Press it again to exit the ARC mode and the LED is off.
ARC Mode
Display (e.g.TV)
Audio Transmission Path
ON
ARC is supported
The TV audio is transmitted from the TV
back to the receiver via HDMI cable, and
then it will be output by the
ARC Audio
Out
port of transmitter.
ARC is not supported
Connect the TV to the
ARC Audio In
port
of receiver with an audio cable. The TV
audio is transmitted from the TV back to
the receiver via the audio cable, and then it
will be output by the
ARC Audio Out
port
of transmitter.
Note that if the ARC mode is ON, the
Audio Breakout
port of receiver has no
audio output.
OFF
/
The TV audio can’t be back to the
ARC
Audio Out
port of transmitter. The
Audio
Breakout
port of receiver is connected to
speaker or amplifier for HDMI source audio
de-embedding.
