HDMI2.0 Fiber Optical Extender
2
4. Panel Description
4.1 Transmitter
No.
Name
Description
①
Power LED
Turns red when DC power present.
②
Link status LED
Turns green when the Transmitter and Receiver link
successful.
③
Work status LED
Turns green when the signal data is transmitted between
Transmitter and Receiver.
④
ARC switcher
▪
ARC (Default): The audio signal can be back to HDMI
input and audio output port on Transmitter from the
HDTV display connected to Receiver.
▪
AUDIO: The audio signal is transmitted from audio input
port on Receiver to audio output port on Transmitter.
For more details, please refer to the
5.system connection
.
⑤
FW
USB port, used for firmware update.
⑥
OPTICAL OUT
Connect to the OPTICAL IN port on Receiver via two
OM3/OM4 multi-mode fiber cables (A-B; B-A).
⑦
HDMI IN
Connect with HDMI source.
⑧
AUDIO OUT
Connect with audio broadcast device.
⑨
IR IN
Work with far-end IR OUT port on Receiver, connect with IR
Receiver (with carrier) to collect IR signal to control far-end
display.
⑩
IR OUT
Work with far-end IR IN port on Receiver, connect with IR
Emitter to send IR signal to control source device.
⑪
RS232
Makes up bi-directional RS232 pass-through control with
the RS232 port on Receiver. If one is connected with control
device (e.g. PC), and the other should be connected with
the third-party that need to be controlled.
⑫
DC 12V
Connected with 12VDC power adaptor.
Tx
Rx
ARC
B
A
AUDIO
ARC
LINK STATUS
FW
1
2
3
4
5
6
7
8
9
10
11
12
