5
Receiver Panel Description
1. Power LED:
The LED illuminates green when power is applied and is off when no
power is present.
2. LINK LED:
The LED illuminates blue when there is a valid HDBaseT connection
with the transmitter. The LED is off when there is no valid link.
3. HDMI LED:
The LED illuminates blue when the display device (e.g. HDTV) is
connected to the HDMI output port.
4. RS232:
3-pin terminal block for bi-directional RS232 pass-through or RS232 relay
control. The baud rate is fixed 9600.
5. RELAY 1&RELAY 2:
Two 3-pin terminal block to connect relay device (e.g.
projector screen) for relay control. Please refer to the chapter
for more details.
6. HDBT IN:
RJ45 port to connect the
HDBT OUT
port of transmitter by CATx cable.
The HDCP LED illuminates green when the video contains HDCP content, or
blinks green when the video has no HDCP content. The LINK LED illuminates
orange when there is a valid HDBaseT link between the transmitter and the
receiver.
7. HDMI OUT:
Type-A female HDMI output port to connect an HDMI display device.
8. DC 24V:
Locking power port for 24V DC power adapter connection.
Tx
Rx
NO
NC
COM
NO
NC
COM
HDCP
LINK
1 2 3
4
5
6
7
8