background image

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

-11-

HEATER

TIMER

High Heating and Low heating setting:

If press "HEATER" button on keypad by 3 seconds,can switch between 

 and 

.(Please Note:this function is not available on the remote control.) Boot default setting 

temperature is 72

  (22

), if the room temperature is lower than the setting temperature, 

Then the electric fireplace high heating mode start to work, if you need electric fireplace 

heating work in low heating mode, then click the keypad or remote control the HEAT 

button to switch the heating on high and low working mode ( first time press the button 

the display window will display the current heating work mode, such as the current 

heating setting mode is high heating then  display window flicker HH, when you press the 

button once again , the display window flicker LL,  the heating mode become low heat-

ing, if you press the button once again, then the display window flicker OO, the heating 

mode become OFF mode, if you repeat press the HEAT button, then the heating mode 

will be work on HH-LL-OO three kind mode in cycles),  every time you press the button 

will have a short buzzer sound, if you want to turn off the electric fireplace heating func-

tion, you also can operate on the keypad or remote control setting temperature "DOWN" 

button

.

Make the setting temperature is lower than the room temperature , then you can 

shut off the electric fireplace heating function. When the heating is turned off, the fan 

which inside  the electric fireplace will continue to work for 10 seconds before stopping. 

Timer Setting:

 

Timer can be set it between of 0-12 hours, When turn on , the electric fireplace timing of 

the default is 0 hours, you can operate the timer setting by the keypad or remote control 

With the TIME button, After the electric fireplace on working, press the TIME buttons on 

the keypad or on the remote control,  then The display at the 

temperature display in the display window changes to "00" and is flashing, at this time, 

every time you press the button of the TIME in 

(0.5H-1.0H-1.52H-2H-2.5H-3H-3.5H-4H-4.5H-5H-5.5H-6.0H-6.5H-7.0H-7.5H-8.0H-8.5H

-9.0H-9.5H-10H-11H-12H) change, How long time you need it, then you stop press, 

after display flashing by 10 seconds, if you not operate, the display will be transferred 

back to the room temperature display and in a constantly light state.  

Temperature setting increase buttons:  

Temperature setting range is 60

(15

)-97

(36

), ( the default setting temperature is 

72

/22

), press the UP button on the keypad or remote control by each time, the 

temperature will add 1

/1

.If long time press on keypad (don't lose the button, the the 

Numbers is change) set temperature will continue to increase until maximum.(Note that 

this long press function is not available on the remote control.) When on temperature 

setting, the temperature display window is in a flickering state. After 10S  no  operate 

the set temperature button, then the display window will be turned back to the room 

temperature display and in a constantly bright state . 

Temperature setting decrease buttons: 

Temperature setting range is 60

(15

)-97

(36

), ( the default setting temperature is 

72

/22

), press the DOWN button on the keypad or remote control by each time, the 

temperature will reduce 1

/1

.If long time press on keypad (don't lose the button, the 

the Numbers is change) set temperature will continue to decrease until the minimum.(Note 

that this long press function is not available on the remote control.) When on 

temperature setting,  the temperature display window is in a flickering state. After 10S  

no operate the set temperature button, then the display window will be turned back to 

the room temperature display and in a constantly bright state.

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM   ELM

Summary of Contents for EF-2036FU

















Reviews: