5/16
Using the base unit speakerphone
1. Press the speakerphone button to answer the call.
2. To end the call, simply press the speakerphone button again. The line status LED will turn off.
(III)
Redial
Using the wireless handset
1.
Lift the handset and press the “Off-hook” button
to get a line.
2.
Press the “REDIAL” button to dial out the last dialed number from the memory.
3.
To end the call, place the handset back on the cradle or press the “On-hook” button
Using the base unit speakerphone
1. Press the speakerphone button. The red LED indicates that the speakerphone is active, press the
REDIAL button to dial out the last dialed number from the memory.
2. To end the call, press the speakerphone key again. The LED will turn off.
(IV)
Direct Memory Dialling
Using the wireless handset
1. Lift the handset. Press the M1 button to dial the pre-stored number from the direct memory.
2. To end the call, place the handset back on the cradle, or press the “On-hook” button
Using the base unit speakerphone
1. Press the desired memory button (one of the ten memories on the base unit). The red LED
indicates that the speakerphone goes active automatically. It dials out the pre-stored number from
the direct memory automatically.
2. To end the call, press the speakerphone key again. The LED will turn off.
(V)
Call Flash
Press the FLASH button, labelled
on the base unit, to switch between calls. This will put the
current call on-hold and allow to you make a call or listen to another call.
(VI)
Call Hold
During conversation, press the HOLD button to place a call on hold. The other party will hear hold
music.
To deactivate the call on hold, press the HOLD button again.
