5
PACKAGE CONTENTS (CONT.)
11 (x1)
Rack
12 (x1)
Gear Cover
13 (x13)
Screw
14 (x8)
S/S Crossing Screw
15 (x1)
Gear
16 (x1)
Small Gear Shaft
17 (x1)
Hand Crank
18 (x1)
Big Gear Shaft
19 (x1)
Gear Support
20 (x1)
Bottom Gear Cover
21 (x1)
Plunger
22 (x1)
Gasket
23 (x1)
Spring
24 (x1)
Exhaust Pin
25 (x2)
Spring Round Pin
26 (x4)
Rubber Foot
OPERATING INSTRUCTIONS
STEP 1
Put hand crank
(7)
on gear shaft, twist wing nut to secure, and rotate counter
clockwise until plunger
(4)
is all the way up and released from the thread rod
(5)
.
Tilt the cylinder
(3)
back and lift to remove. Clean both cylinder and plunger.
NOTE:
The two speed gears rotate in opposite directions. For this reason, the
following instructions are accurate only when using the fast gear. To use the slow
gear, simply rotate hand crank in opposite direction of fast gear.
5
4
3
6
7