As Spring s Spring embl Monitor Gas Spring y Steps Steps Spring
2
Step 1
-
1a 1
-
1a 2a
-
1a 2b
-
1a 3
Install the clamp base support (B) onto the base
of the monitor stand (A) with bolts (H) using
provided 4mm Allen wrench (J).
Secure clamp (C) to upper two holes
with bolts (H) using 4mm Allen wrench
(J) for desk with a thickness of 10-
55mm.
Secure clamp (C ) to upper two holes with
bolts (H) using 4mm Allen wrench (J) for
desk with a thickness of 10-85mm.
Attach cover (D) to base support.
Step 1 (Continued)
Tighten the clamp to the desktop
using the plastic knob.
-
1a 4
-
1b 1
Slide the long screw (E)
through the top of the
grommet base support (F) and
install on base of monitor
stand with bolts (H) using 4mm
Allen wrench (J).
-
1b 2
Position stand on desk with
long screw through hole, and
secure by using the support
plate (I) and clamp knob (G) on
underside of the mounting
surface. NOTE: For self-drilled
installation, drill an 8.5mm hole
or larger through the
mounting surface.
