4
Slide VESA plate with monitor onto mounting
bracket of pole
(B)
and secure with previously
removed knob.
STEP 7
Adjust gas spring strength using 6mm Allen
wrench
(G)
. Turning clockwise will decrease
strength, and counter-clockwise will increase
strength.
STEP 8
Loosen top two screws on back of pole
(B)
until 5mm of thread is exposed on each. Slide pole onto
mount of arm
(A)
. Attach with previously removed screws, and tighten all screws with 4mm Allen
wrench
(F)
.
STEP 5
OPTION A: Flat Back Monitor
For flat back monitor, attach VESA
plate using 12mm screws
(M-A or
M-B)
with washers
(M-E)
.
STEP 6
OPTION B: Curved Back Monitor
For curved back monitor, attach VESA
plate using 12mm screws
(M-C or M-D)
with washers
(M-E)
and spacers
(M-F)
.
5mm
F
1
2
F
3
M-A
M-B
M-E
M-C
M-D
M-E
M-F
G
NOTE:
Tighten socket set screw if the joint
makes a popping noise.
