3
If screen becomes dirty, wipe gently with a soft, damp cloth. A light cleanser (such as hand
soap) or detergent may be used for difficult spots. Do NOT use bleach or solvents to clean
screen material.
ASSEMBLY STEPS
STEP 1
CLEANING
SCREEN ADJUSTMENT
Measure distance between two rings on the housing. Mark locations on wall to place screws
and ensure locations are level and equal in height. Insert screws into wall.
STEP 2
Carefully hang housing onto screws, using attached rings.
STEP 3
NOTE:
Mounting screws not included
PULL DOWN
To extend the screen, use steady pressure to pull down. The screen will lock automatically when you stop
pulling.
RETRACT
To retract the screen, give a gentle tug which will release automatic lock. Hold pulling ring to prevent
screen from moving too quickly.
TOOLS NEEDED
Phillips
Screwdriver
Drill
Level
Screws (x2)
Choose a suitable location to mount. The screen must be installed at least 7ft (213.5cm) off
the ground to allow for full extension.
NOTE:
While retracting, make sure screen rolls evenly on both sides
