2
ASSEMBLY STEPS
STEP 1
Separate the clamps
(A)
into separate
components.
PACKAGE CONTENTS
WARNING!
A
(x2)
Clamp
B
(x4)
Pad
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE:
SOME HARDWARE MAY NOT BE USED
TOOLS NEEDED
Phillips
Screwdriver
C
(x4)
ST3.9x25
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
D
(x2)
M6x12
E
(x2)
M6x25
F
(x2)
M6x40
G
(x4)
Plastic Pad
H
(x1)
Allen Wrench
STEP 3
STEP 2
Apply the pads
(B)
to the underside of each
clamp.
Place the plastic pads
(G)
on the inner face of each
upper clamp component.