3
ASSEMBLY STEPS
STEP 1
STEP 2
Place the assembled panels on the
edges of the desk, and tighten the
clamps to secure.
NOTE:
Over-tightening the clamps will
cause the panels to lean forwards.
DESK
OPTION A: Flush Fit
Attach clamps
(A)
to 60” panel
(F)
using M6x30 screws
(D)
and washers
(C)
. Tighten with a Phillips screwdriver.
Repeat for assembly of 24” panels
(G)
.
OPTION B: Gap-Fit for Cables and Devices
Attach clamps
(A)
to 60” panel
(F)
using
M6x40 screws
(E)
washers
(C)
and spacers
(B)
as shown in the diagram. Tighten with a
Phillips screwdriver. Repeat for assembly of
24” panels
(G)
.