4
STEP 2
(Option B)
STEP 3
Attach Plastic Covers
(C)
to Arm
(A)
.
Concrete/Brick Wall Installation
Use Arm
(A)
to mark mounting holes on wall. Use of a stud finder and level is highly recommended.
Using a 12/25” (12mm) drill bit, drill holes at least 3.74” (95mm) deep into marked locations. Press
Concrete Anchors
(W-B)
into holes, then insert ST8x90mm Screws
(W-A)
into the top hole, leaving 6mm
of thread exposed. Hang top hole in Arm
(A)
over the screw, and secure using four more ST8x90mm
Screws
(W-A)
with M8 Washers
(W-C)
.
A
W-A
W-B
