Vivo MOUNT-MACM1, Instruction Manual, Page: 3 / 4

3
STEP 2
Assemble the VESA Adapter Plate
(A)
and Clamp
Plate (B) to the base of the iMac using the M4x12
Thumbscrews (S-A) .
NOTE: The Clamp Plate should be pushed all
the way up underneath the iMac base, and the
curved tabs of the VESA Adapter Plate should be
resting over the curved top of the base.
STEP 3
Install the VESA Adapter with iMac to the VESA mount
using the M4x8 Thumbscrews (S-B) .
STEP 4
Use the M4x22 and M4x37 Thumbscrews (S-C and S-D) to adjust the
angle of the iMac screen. They may be left partially loose to work as
a limiter while allowing the screen to tilt freely, or tightened to hold
a specific tilt angle.
A
B
S-A
S-B
S-C
S-D
Curved Tabs