2
3
ASSEMBLY STEPS
STEP 1
Remove two bolts from mount
(A)
with 4mm Allen wrench
(B)
as shown in diagram. Separate VESA
plate from mount.
PACKAGE CONTENTS
TOOLS NEEDED
44lbs
(19.96kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A
(x1)
Mount
B
(x1)
4mm Allen Wrench
C
(x1)
5mm Allen Wrench
W-A
(x4)
Screw
M-A
(x4)
M4x14
M-B
(x4)
M5x14
M-C
(x4)
M6x14
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE:
NOT ALL HARDWARE INCLUDED WILL BE USED
W-C
(x2)
Washer
W-B
(x4)
Anchor
Push arm against ceiling plate of mount
(A)
to release lock and pull the arm down.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 1-800-371-5654.
STEP 2
M-D
(x4)
M8x20
M-E
(x4)
D5 Washer
M-F
(x4)
D8 Washer
M-G
(x8)
Spacer
Drill
Pencil
B
