Vivo MOUNT-G200B, Instruction Manual

Page: 3 / 8

3
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Using the wall plate on the arm
(A)
, mark
drilling locations. Use of a stud finder is highly
recommended. Drill 2.2” (55mm) deep holes using
a 3/16” (4.5mm) drill bit, and mount the arm to
the wall using screws (W-A) and washers (W-C) .
OPTION B: Concrete Wall
Using the wall plate on the arm
(A)
, mark drilling
locations. Drill 2.4” (60mm) deep holes using a
3/8” (10mm) drill bit, press anchors
(W-B)
into
holes, and mount the arm to the wall using screws
(W-A) and washers (W-C) . NOTE: Anchors are
made for use with concrete or brick, and will not
work with drywall.
STEP 2
Attach screw covers
(C, D)
to wall plate.