4
STEP 4
Mount the Shelf Bracket Supports (C) to the sides of the Plate Support
Bracket (B) using M6x12 Screws (L) and tighten with the 4mm Allen
Wrench (O). The Shelf Bracket Supports (C) should be mounted to the
maximum height to ease the assembly process, and can be adjusted
later to match the cabinet and TV height.
STEP 5
Assemble the Shelf Bracket (D) to the top of the Shelf Bracket Supports (C) using M6x12 Screws (L)
and tighten with the 4mm Allen Wrench (O).
STEP 6
Plug the Power Cable (R) into a wall outlet. To ensure the Remote (S) is paired, use a pencil or other
thin tool to press the small button on the end of the Control Unit (G), then after hearing a beep, press
the SET button on the Remote (S). The Control Unit (G) will beep for about 10 seconds. Once the
beeping stops, press the UP button on the Remote (S) to fully raise the Motorized Column (A).
Assemble the TV Plate (E) to the Plate Support Bracket (B) using M10x20 Bolts (M) and M10 Nuts (N),
making sure the M10 Nuts (N) are on the front of the TV plate (E). Tighten using the 6mm Allen Wrench
(P) and Wrench (Q).
B
C
R
G
A
B
E
