6
7
STEP 3 (Continued)
Using screws previously removed (in beginning of step 2), fasten the VESA plate to ceiling mount.
STEP 4
Run cables along edge of mount. Allow slack in cables for arm movement. Place covers over cables and
snap into place. Using cable ties
(J),
fasten cables.
NOTE:
Do not run any cables through the mount
motion space.
Clearance between the ceiling and top edge of TV should be no less than 15mm when TV is in the fully
lowered position.
STEP 5
Peel the backing paper. Place IR receiver
(G)
on TV as desired. Ensure nothing will obstruct the
transmission from where the TV will be viewed. Plug IR receiver
(G)
into mount. Plug power supply
(I)
into mount, and connect to AC outlet.
NOTE:
Plugging power supply into AC outlet prior to the mount
may cause a large spark when connecting to the mount.
