2
3
PACKAGE CONTENTS
TOOLS NEEDED
Scissors
33lbs
(14.97kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 2
Screw keybaord hinges
(B)
onto keyboard tray
(C),
using screws
(D).
STEP 3
Squeeze the handle on the right side, then raise or lower desktop to desired height.
WARNING!
Phillips
Screwdriver
A
(x1)
Adjustable
Desktop
B
(x2)
Keyboard
Hinge
C
(x1)
Keyboard
Tray
D
(x6)
Screw
E
(x2)
Tie
STEP 1
Carefully remove desk frame and contents from packaging. Cut ties from desktop (
A
).
Screw assembled keyboard tray and hinges
(B)
onto adjustable desktop.
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
B
C
D