Vivo DESK-EP40TW Instruction Manual Download Page 2

2

If you do not understand these directions, or if you have any doubts about the safety of the 

installation, please call a qualified technician. Check carefully to make sure there are no missing or 

defective parts. Improper installation may cause damage or serious injury. Do not use this product 

for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. 

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or 

inappropriate use.

WARNING!

ELECTRICAL SAFETY INSTRUCTIONS

THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC 
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

• 

 DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.

• 

DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.

• 

NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR 
SELLER TO REPLACE DAMAGED PARTS.

• 

NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE 
MADE CONTACT WITH LIQUIDS.

• 

ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.

• 

OUTDOOR USE IS PROHIBITED.

Upward and Downward Movement

Press and hold the up or down arrow until the desk reaches the desired height.

Reset Operation:

Unplug the desk for at least five seconds. Press the down arrow until the desk reaches the lowest position 

and rebound approximately 1cm. The desk will beep twice, then release the down arrow. 

OPERATING CONTROL PANEL

Reviews: