4
5
STEP 2
STEP 3
Flip the display case over and align Top Panel
(D)
with the pre-drilled holes. The bent side of this piece
will be at the front of the case. Insert M5x15 Screws
(S-A)
into the pre-drilled hole and then slide Lock
Washers
(S-B)
onto M5x15 Screws
(S-A)
and secure with M5 Nuts
(S-C)
. Gently tighten with an
adjustable wrench until the nut is snug. Do not over tighten.
D
S-A
S-B
S-C
Place Front Panel
(E)
on the angled front edge of the display case and insert M5x15 Screws
(S-A)
into
the pre-drilled holes and then slide Lock Washers
(S-B)
onto M5x15 Screws
(S-A)
and secure with M5
Nuts
(S-C)
. Gently tighten with an adjustable wrench until the nut is snug. Do not over tighten.
E
S-A
S-B
S-C
