5
STEP 2
Insert plastic foundation
(F4)
into the groove of the top bar.
STEP 3
Put a small dab of wood glue on each ends of the end panel. Attach the bottom
bar
(F5)
into the final notches of the frame. Push down until the fit is snug.
Bottom Bar
View from Bottom
STEP 4
Place two gray nails
(F3)
at one end of the top bar, spaced evenly, and hammer
into the end panels. Hammer another two gray nails on the opposite end of the
top frame bar in same manner.
Aerial View of Top
Bar with 2 long
nails nailed down
into side panels
Side View of
Top Bar with
2 long nails
nailed down
into side panels