Vivitek Qumi Q38, User Manual

Page: 42 / 55

42
Keystone Correction Settings
Perform the following
steps to change the projector’s keystone correction:
1. Press the OSD Screen Menu button on the top of the projector or the
remote control to enter the Settings menu.
2. Move the cursor to highlight the Keystone Correction settings, and press to
enter this mode.
3. Press , , and buttons to select the desired Keystone Correction
mode.
4. Press button to exit the Keystone Correction settings.
Note: The keystone correction may be adjusted as required by the application.
(Values are between -35 - +35)