DU8395Z Series DLP Projector - User Manual
UM83950922EN01
11
IO Panel
WIRED
REMOTE
HDBaseT/LAN
HDMI I
DVI-D
HDMI 2
IN
OUT
TRIGGER
RS-232
V
H
B/Pb
G/Y
R/Pr
VGA
MONITOR OUT
3D
SYNC
IN
OUT
SDI
TRIGGER(12V +/-1.5V)
When connected to the screen through a 3.5mm cable,
the screen deploys automatically on startup of the pro
-
jector. The screen reacts when the projector is powered
off.
RS-232
The 9-pin D-sub interface is used to connect to the PC
control system and projector maintenance.
Component (V, H, B/Pb, G/Y, R/Pr)
Connect RGBHV or Component signal from computer or
component video enabled device
VGA
Provide the standard 15-pin VGA connection and can
connect to RGB, HD Component or personal computer.
MONITOR OUT
Connect to a monitor to display the projected content.
WIRED REMOTE
Connect the supplied remote controller to the projector
HDBaseT/LAN
Connect an Ethernet cable (Cat5e/Cat6, not supplied)
from a computer, network device, or HDBaseT transmit-
ter.
HDMI 1 / HDMI 2
High Definition Multimedia Interface, connect the HDMI
cable from a computer or video device
DVI-D
Use the DVI-D cable to connect the DVI-D input port of
the projector to the DVI-D output port of the video device.
SDI IN/OUT
Connect to SDI source.
3D SYNC IN / Out
Connect to the 3D IR synchronization signal transmitter.
Note for Trigger
•
When the projector is turned on, a control signal (DC 12V) outputs from this terminal.
•
Do not use this jack for anything other than intended use.
Note for Wired Remote
•
Please make sure whether the port for insertion is correct before the terminal of the wired remote control is
inserted. The remote control may be damaged if inserted to the wrong port such as trigger. Do not use this jack
for anything other than intended use.
•
When the cable of the wired remote control is plugged into the projector, the projector will automatically switch
to the wired control mode and turn off the wireless infrared receiving function. So before using the wireless
infrared controller, make sure the cable of the wired remote is not plugged into the Wired Remote port.
Summary of Contents for DU8395Z
Page 1: ...DU8395Z User s Manual ...
