Vivitek DU70 Series User Manual Download Page 16

Page: 16 / 92

—

Side view

—On-Screen Display (OSD) buttons and IO

TEM

ABEL

ESCRIPTION

EE PAGE

MONITOR OUT

Connect an RGB cable to a display.

3D-SYNC OUT (5V)

Connect 3D IR glasses receiver unit.

COMPUTER IN

Connect an RGB cable from a computer or a video enabled device.

HDBaseT

Connect Cat5e/Cat6 cable from HDBaseT TX Box (VIDEO
EXTENDER) for HDBaseT signal received.

3D-SYNC IN (5V)

Connect 3D-sync in cable from a computer or an enabled device.

DVI-D

Connect the DVI CABLE to display.

SERVICE

For service personnel only.

HDMI 1

Connect the HDMI cable from an HDMI device.

HDMI 2 / MHL

Connect the HDMI/MHL cable from an HDMI/MHL device.

Note:

Set the Source to HDMI

/MHL also can be charging connected

MHL compatible smart device as long as the projector Power
On.

10.

RS-232C IN

Connects RS-232 serial port cable for remote control.

11.

RS-232C OUT

Connects to another projector (same model) for RS-232 control.

12.

Opens and exits OSD menus.

13.

Navigates and changes settings in the OSD.
Quick Menu

– For Vertical Keystone.

14.

ENTER

Enter or confirm highlighted OSD menu item.

15.

Power

Turn the projector on or off.

16.

Navigates and changes settings in the OSD.
Quick Menu

– For Horizontal Keystone.

1 2 3 4 5 6 7 8 9

12 13

Summary of Contents for DU70 Series





























































































Search results

Summary of Contents for DU70 Series

Reviews:

Vivitek DU70 Series, User Manual, Page: 16 / 92

Search results

Summary of Contents for DU70 Series

Reviews: