Vivitek DH75 Series, User Manual

Page: 19 / 76

—
11
—
Starting and Shutting down the Projector
1.
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
2.
Turn on the connected devices.
3.
Ensure the POWER LED displays a
solid green. Then press the POWER
button
of the remote
to turn on the
projector.
The projector splash screen displays
and connected devices are
detected.
See
Setting an Access Password
(Security Lock) on page 12 if
security lock is enabled.
4.
If more than one input device is
connected, press the
SOURCE
button
of the remote
and use ▲▼ to
scroll among devices.
(Component is supported through
the RGB to COMPONENT
ADAPTER.)

HDMI1/MHL: High-Definition Multimedia
Interface 1 /MHL

HDMI2: High-Definition Multimedia Interface 2

VGA 1/VGA 2: Analog RGB
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector

S-Video: Super video (Y/C separated)

Composite Video: Traditional composite video
5.
When the “Power Off? /Press Power
again” message appears, press the
POWER button. The projector turns
off.
Caution:
Do not unplug the power cord until the POWER LED solid green
–indicating the projector has
cooled down.