manualshive.com logo in svg

Vivitek DH262 Series, User Manual

Share
Download
Vivitek DH262 Series User Manual Download Page 6

1

Introduction

Projector Features

The projector integrates high-performance optical engine projection and a user - friendly 
design to deliver high reliability and ease of use.
The projector offers the following features:

• DLP

®

 technology

• DS262: 800 x 600 SVGA resolution
• DX263/DX281-ST: 1024 x 768 XGA resolution
• DW265/DW282-ST: 1280 x 800 WXGA resolution
• DH268: 1024 x 768 1080P resolution

• Compatibility with Macintosh

®

 computers

• Compatibility with NTSC, PAL, SECAM and HDTV
• D-Sub 15-pin terminal for analog video connectivity
• User-friendly, multi-language on-screen display
• Advanced electronic keystone correction
• RS-232 connector for serial control
• Less then 0.5w power consumption in standby mode.
• Dynamic ECO starts your dynamic power saving
• Quick Cooling, Auto Power Off, Auto Power On functions
• Instant Restart function enables to restart the projector immediately within 90 

seconds after turning it off.

• 3D Function supported

Note

•

The information in this manual is subject to change without notices.

•

The reproduction, transfer or copy of all or any part of this document is not permitted 
without express written consent.

•

The apparent brightness of the projected image will vary depending on the ambient 
lighting conditions, selected input signal contrast/brightness settings, and the 
projection distance.

•

The lamp brightness will decline over time and may vary within the lamp manufacturers 
specifications. This is normal and expected behavior.

Summary of Contents for DH262 Series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands