Vivitek D8010W Page 4 User Manual Download

Page: 4 / 73

DLP Projector - User’s Manual

COPYRIGHT INFORMATION

Copyright

This publication, including all photographs, illustrations and software, is protected under international copyright laws,

Disclaimer

The information in this document is subject to change without notice. The manufacturer makes no representations or

warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or

fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make changes

from time to time in the content here without obligation of the manufacturer to notify any person of such revision or

changes.

About this manual

This manual is intended for end users and describes how to install and operate the DLP projector. Wherever possible,

relevant information such as an illustration and its description has been kept on one page. This printer-friendly format is

both for your convenience and to help save paper, thereby protecting the environment. It is suggested that you only print

sections that are relevant to your needs.

Summary of Contents for D8010W










































































Search results

Summary of Contents for D8010W

Reviews:

Related manuals for D8010W

Brands by name

Popular brands

Vivitek D8010W, User Manual

Search results

Summary of Contents for D8010W

Reviews:

Related manuals for D8010W

Brands by name

Popular brands