Vivitek D75XXWTIR Series User Manual Download Page 30

Page: 30 / 75

—

Image Menu

Attention !

All of display mode parameters when changed will be saved to user mode.

Press the

MENU

button to open the

OSD

menu. Press the cursor ◄► button to move to the

Image

Menu

. Press the cursor ▲▼ button to move up and down in the

Image

menu. Press ◄►

to enter and change values for settings.

TEM

ESCRIPTION

Display Mode

Press the cursor ◄► button to enter and set the Display Mode.

Brightness

Press the cursor ◄► button to enter and adjust the display brightness.

Contrast

Press the cursor ◄► button to enter and adjust the display contrast.

Computer

Press

(Enter) / ► to enter the Computer menu. See

Computer Menu

on page

Auto Image

Press

(Enter) / ► to automatically adjustment for phase, tracking, size and

position.

Advanced

Press

(Enter) / ► to enter the Advanced menu. See

Advanced Feature

on page

Color Manager

Press

(Enter) / ► to enter the color manager menu. See page

for more

information on

Color Manager

Summary of Contents for D75XXWTIR Series












































































Search results

Summary of Contents for D75XXWTIR Series

Reviews:

Related manuals for D75XXWTIR Series

Brands by name

Popular brands

Vivitek D75XXWTIR Series, User Manual

Search results

Summary of Contents for D75XXWTIR Series

Reviews:

Related manuals for D75XXWTIR Series

Brands by name

Popular brands