Vivitar vivicam S048, User Manual, Page: 6 / 71

5
Initial Camera Setup
INSERTING THE BATTERIES
1) Move the Lock/Unlock Switch on the battery cover to unlock the cover.
2) Slide open the battery cover according to the arrow direction.
3) Insert 2 x AAA (1.5V) batteries. Alkaline batteries recommended (not included).
Close the battery cover, replace the Lock/Unlock Switch to lock the cover.
NOTE :

Remove the batteries from the camera when not in use for an extended period.

Do not mix alkaline and non-alkaline batteries.

Some features, such as Flash, will not work if the battery power level is low.

When the battery power is low the battery icon turns red and the camera will automatically
turn off a few seconds later.