30
5)
If you have internet access, the “Choose your language” window opens, choose your
languag
e and click “Next” to open the next window.
6)
Select your camera model from the list and click “Next” to open the next window.
7)
Click “Next” to confirm your camera model selection and to install the application.
8)
Please wait while the application is being installed on your computer.
9)
Please review the license terms.
On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click
“Next” to continue.
10)
On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where
the program will be installed, and then click “Install”.
11) Please wait while the application continues the installation process on your computer.
On Macintosh: If needed, please follow instructions to install the Adobe® Flash® Player.
12)
On PC: Click the “Close” button when the installation is complete.
Click the “Launch Vivitar Experience Image Manager” to open the application.
13)
On Macintosh: Click the “Quit” button when the installation is complete.
Click the “Launch Vivitar Experience Image Manager” to open the application.
14) If you close the application you can run the Vivitar Experience Image Manager from the
Programs (PC) or Applications (Mac) menu on your computer.
Connecting the Camcorder to the Computer
1)
Slide down the USB lever on the side of the digital video recorder to reveal the retractable
built -in USB connector.
2)
Insert the USB connector into an available USB port on your computer.
3)
Power the camcorder ON.
4)
The first time you connect the device to the computer you will have to wait a few seconds
until the computer recognizes the device.
5)
As your camcorder is a
mass storage device “MSDC” will appear on the LCD, indicating that
your camcorder is in Mass Storage Mode.
