6
SD Card
Make sure an SD card has been properly inserted into your camera. (SD card not included.)
To properly insert the SD Card:
1. Turn off the camcorder.
2. Pull down
the Battery cover/Memory card slot to open it.
3. Insert the SD card with the front piece of the card against the LCD screen. If the memory card
has successfully been inserted, you will hear a click and an icon
will appear on the LCD
screen.
4. To remove the card, gently press on the edge of the card and release it. Pull the card out and
close the battery cover.
5. If the card is inserted or removed while the camcorder's power is on, it may damage the card
and/or any recorded data. Always confirm that the power is off before inserting the card into
the camcorder.
NOTE
:
After the camera is powered on, an SD icon will appear on the LCD display. If you do not see
the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card). If the
SD card is locked this will prevent the camera from saving captured photos to the SD card.
Power On
Press the
POWER
button, located above the LCD Screen, to turn on the digital video camera.
