vividtouch VTF-6510, Installation & Operation Manual

Page: 39 / 77

39
NOTE Default settings appear in bold type.
Figure 4-1. OSD Menu Structure
Main Menu SubMenu Value
OSD Settings
Horizontal 0~100
Vertical 0~100
Transparency Off; 1~4
OSD Timeout 5s; 10s; 20s; 30s; 60s
OSD Rotation
(VTF-6510 only)
Portrait; Landscape
Language
English , French, German, Dutch, Hungarian, Slovenian, Serbian,
Croatian, Danish
Splash Screen On; Off
Setup
Auto Adjustment
H.Position 0~100
V.Position 0~100
Phase 0~100
Clock 0~100
Zoom 10 steps
Power LED On; Off
Real Time Clock User Mode; Workday Mode; Everyday Mode
Adv. Setup
Smart Light Control Off; DCR; Light Sensor
IRFM On; Off
MEMC
(VTF-6510 only)
Off; Low; Medium; High
Noise Reduction Off ; Low; Medium; High
Wake Up From Sleep VGA Only; Digital, RS232. Ethernet; Never Sleep
DP Ver. 1.1; 1.2
EDID Setup HDMI: 4K2K/1080P; DP: 4K2K/1080P
Touch Control Auto; OPS; USB Touch 1; USB Touch 2; PC
Firmware Update
Factory Reset
Communication
RS232 Baud Rate
115200 ; 38400; 19200; 9600
Enable Network Yes; No
IP Address Settings Please refer to Communication Menu section for details
Power Status Alert Yes; No
Source Status Alert Yes; No
Signal Lost Alert Yes; No
Load Default Yes; No
Device MAC Shows the MAC address of the device
Information
(Timing info) Shows the name of input source
PC Power Status Shows the power status of PC
Firmware Version Shows the firmware version of the monitor
SubMCU Version Shows the firmware version of the monitor
Serial Number Shows the Serial Number of the monitor