4
5
•
Please ensure that the voltages of power supply you are using match with rated
working voltages before operating the machine
•
The power supply should be close to the machine for convenient use
•
The power supply should provide reliable protective earthing connection
•
This machine must be earthed reliably so as to ensure the safety of the machine
during
operation
•
Only the operators of this machine should operate the electric or motion
components/controls
•
Please don’t use damaged wires or sockets
•
Please keep children away from touching and operating this machine
•
Please do not spray water or other liquid on the machine otherwise electric shock or
machine faults could occur
•
Please do not replace power cord or plugs yourself, do not put heavy objects on the
power lines as this may cause electric shocks
•
During use please take care that no clothes, neckties, hair, necklaces etc are near the
machine otherwise injuries could occur
•
Please don’t put burrs, sharp blades or over thick rigid materials into the two rubber
covered rollers (for example, tools, rulers and knives etc.)
•
Dont cut adhesive fi lms directly on the surfaces of the rubber covered rollers to avoid
damage
•
Please shut down this machine after laminating to avoid misuse of the machine
•
At the end of the working day always gape the rollers to ensure no fl at spots or
distortions
occur
•
When you need to move this machine, please shut down the power switch and pull
out the plugs
•
Please be aware of the location of the wheels during moving or operating this
machine to avoid foot injuries
•
Always ensure the machine is positioned on a fl at and level fl oor
•
Please shut off the power supply (pull out the power plug) when the machine isn’t
going to be used for long periods of time.
•
Ambient temperature 10°C - 60°C, humidity 30% - 80%, Ideal humidity 55%
•
Dust - Due to the static adherance of the fi lm, you should keep the environment clean, a
dust cover is provided with the machine
•
Please do not keep the machines in direct sunlight
•
Please do not keep the machine in or around dusty areas
•
Enough space should be kept around the machine to ensure the secure and eff ective ap-
plication. The minimum holding areas are 2.5m x 3m
Environmental Requirements
EM-1200
EM-1400
EM-1600
Max Laminating Width
1200mm
1400mm
1600mm
Max Laminating Thickness
25mm
Temperature of Rubber Roller
Ambient temperature to 60°C
Approx Highest Line Speed
6m/min
Approx Lowest Line Speed
0.7m/min (adjusting the pressure and speeds)
Rated Working Voltage/Frequency
220V, 50Hz (100V, 60Hz)
Rate Input Power
900W
1000W
1300W
Dimensions
1790 x 650 x 1255mm 1990 x 650 x 1255mm
2190 x 650 x 1255mm
Net Weight
185kg
210kg
245kg
Specifi cations
EM-1200SH
EM-1400SH
EM-1600SH
EM-2100SH
Max Laminating Width
1200mm
1400mm
1600mm
2100mm
Max Laminating Thickness
25mm
Temperature of Rubber Roller
Ambient temperature to 60°C
Approx Highest Line Speed
6m/min
Approx Lowest Line Speed
0.7m/min (adjusting the pressure and speeds)
Rated Working Voltage/Frequency
220V, 50Hz (100V, 60Hz)
Rate Input Power
970W
1310W
1500W
Dimensions
1790 x 650 x
1255
1790 x 650 x
1255
1790 x 650 x
1255
1790 x 650 x
1255
Net Weight
185kg
210kg
245kg
280kg
Easymount Single Heated Roller (SH)
Easymount Cold
Safety Instructions
The Control Panel
