After Sales Support
11
Basic Operation
Power On /Off
Select Viewing Source
Press the "SOURCE" button to display the sources list.
Please use the direction buttons to select desired signal, and press "OK" or "
" button to confirm.
If the TV can't find any signal input, you can
try to press ''
button on remote control
to restart the TV.
Please make sure
For example, "TV" for watching TV, "VGA" for PC
''
or on the panel
.
1
on the main power switch ''
''
If
.
Connect the TV unit to power source using power cord.
2. Turn
.
" button on remote
4. Switch the TV to standby mode, just press "
5. To turn off the TV, press ''
6. The power consumption is less than 1W in standby mode.
'' button on the remote control or side panel. Now
'' button on the right bottom of the side panel. Now the
main power
is turned off.
you are not using the TV for a long
time, please disconnect the power cord from the wall.
you have connected all the cables before making the selection.
If the TV displays NO SIGNAL, it is due to connection problem or you have no signal from the sources.
3. When the power indicator is red, the TV is in standby mode. Now press the "
control or side panel to turn on the TV. The TV works normally when the power indicator is in green.
the indicator will be red.
Source
OPTION
Restore Factory Default
EXIT
EXIT
OK
OK
Input Source
DTV
TV
Component1
Component2
PC RGB
-
PC RGB
-
HDMI1
HDMI2
DVD
AV
S Video
-
S Video
-
AV
2
S Video
-
S Video
-
2
TEL:
1300 886 649
NOTE:
NOTE:
The TV set can turn off automatically after 5 minutes while there is no signal input.
