No Tools Required!
ASSEMBLY INSTRUCTIONS
Watch at
bit.ly/bathtubrail
1. Clean bathtub thoroughly and wipe dry before applying
rail. Surface must be dry and free of soapy residue for
proper installation.
2. Lift up knob (A) and rotate counterclockwise to open. Pull
out clamp (B) until rail is wide enough to slip on side of
bathtub.
3. Place Safety Rail on bathtub with knob (A) facing outside of
tub and tighten clockwise until rail feels tight and secure.
4. Push knob (A) down to original position.
5. Test installation of rail before using. Pull forward, back and
side to side. If rail slips or moves, make sure surface is free of
soapy film and is dry, then replace at desired location and
re-tighten.
A
Summary of Contents for LVA1021
Page 1: ...User Manual LVA1021...
