Vivax VCW-2002B2, User Manual, Page: 23 / 40

ENG
VIVAX
5
•
Our company can not be held responsible from failures
that might arise from above mentioned reasons thus all
failures are processed outside of guarantee coverage
USER SUGGESTIONS
• Never use the vacuum cleaner without filters to prevent
damage. Wash and rinse the filters according to usage
frequency and pollution with soap water then fix them
back. That process should keep motor airways open and
extend motor life. Also your device will operate with
maximum vacuum power.
• With this vacuum cleaner, you can sweep up to 2.5 liters
of fluid without removing any unit.
RULES TO BE FOLLOWED IN MAINTENANCE REPAIR
AND USAGE
• Never open and try to fix your vacuum cleaner when it is
failed.
• Do not operate your vacuum cleaner when it is dropped
to floor or striken to a rigid object, contact your authorized
service.
• Never replace a damaged cable or plug, contact your
authorized service.
ASSEMBLY AND USAGE
•
After removing the device from its package, remove the motor section from
the body by opening the locking latches (4) that fix the section in which the
transparent body (1) located.
•
Place the sponge filter (15) into motor section.
•
Fix water filter pipe (12) into water filter bed (14) in the water tank.
•
Fill the product with water up to water level indicator (19).
•
Place the jetty unite (11) into its place. Make sure that the jetty filter (20) is
fixed.
•
Fix the motor cavity (2) and transparent body (1) using locking latches (4).
•
Assemble sweeping apparatus (10), plastic pipe (9), vacuum adjusted
elbow (18), vacuum pipe
•
(18) and pipe head (7).