Vivax TV-32LE80T2S2, Instruction Manual

Page: 80 / 104

ENG
VIVAX
33
2. Back up all of the data in the USB storage device in case data was lost due
to an unexpected accident. We do not assume any liability for the losses by
misuse or malfunction. Data backup is consumer's responsibility.
3. For large file sizes, the loading speed may be slightly longer.
4. The recognition speed of a USB storage device may depend on each
device.
5. When connecting or disconnecting the USB storage device, make sure the
TV is not in USB mode otherwise the USB storage device or the files stored
in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT16, FAT32,
NTFS file system provided with the Windows operating system. In case of
a storage device formatted as a different utility program which is not
supported by Windows, it may not be recognized.
7. When using a USB Hard Disk Drive which requires electric power source,
ensure its power does not exceed 500mA. If the power of the USB hard Disk
exceed 500mA, the TV system will be changed into standby mode, you must
pull out the USB hand Disk and restart the TV system.
8. An "
Unsupported File
" message will be displayed if the file format is
unsupported or the file is corrupted.
9. FHD big picture needs longer time to process, which is not caused by the
TV. Please be patient to wait.
10. This TV may not support some multimedia files changed and upgraded as
the change of encoding format or other technical advances.
Play Movie
Press [
INFO
] /
▼
to display/ exit from the below Menu Bar. Press USB control
buttons on the remote control to do relevant operations.
Movie Control Bar
Play&Pause Fast Forward Skip Next Play Mode
Fast Forward Skip Previous
Stop
Information
Go to Time
Aspect Ratio