
ENG
VIVAX
7
Connected Wattage
The total power consumption of this device can be up to
2500W (please check rating plate of the product). With this
connected load a separate supply line protected by a 16A
household circuit breaker is recommended.
CAUTION: OVERLOAD:
• If you use extension leads, these should have a cable
cross-section of at least 2.5mm
2
.
• Do not use any multiple sockets, as this device is too
powerful.
ASSEMBLY
Remove the heater and all the accessories from the carton.
Mount castors on the baseboard in accordance with picture.
1. Place the heater body inversely with the bottom upward.
2. Connect and tighten two wheel carrier plates to the body with butterfly nuts
as shown in the figures.
3. Place the heater upward after it is installed securely with the wheels touching
the ground
WARNING: Do not use the heater unless the feet are
correctly attached if the heater is used as portable
appliance
Fig 1
Fig 2
Butterfly nuts
Butterfly nuts
Summary of Contents for OH-13250S
Page 62: ...VIVAX ...
Page 80: ...www VIVAX com ...