Vivax IR-2202CP, User Manual

Page: 58 / 72

ENG
VIVAX
9
Anti-Drip Function:
This system controls the water flow to the soleplate at all times. Below a certain
temperature, the anti-drip function cuts off the flow of water and stops the iron
from dripping onto the fabric.
Auto-Shut Off Function (option, not included in all models):
The iron will automatically switch off if it is has not been moved for a while, usually
30 seconds in level state; 8 minutes in vertical state.
To indicate that the iron has been switched off, the auto-off indicator light will start
blinking.
To heat up the iron again:
1). Pick up the iron or move it slightly.
2). The blue auto-shut off pilot light will go out. The blue temperature pilot light
will come on.
3). When the temperature pilot light had gone out and comes on again, the irons
is ready for use
MAINTENANCE
Keep unit to cool down before you start with cleaning.
Do not immerse the unit or power supply cable and plug into water!
After each use:
1). Turn the iron off and unplug.
2). Empty the iron immediately after using. Do not store the iron with water in it.
3). Wait until the iron has cooled before storing it, and always set it on the Hell
Rest to protect the soleplate from scratches, corrosion or stains.
4). After letting iron cool down completely, store the iron vertically in a safe place.
Outside surface of the iron:
After unplugging and cooling the iron, simply wipe off with a damp cloth and if
necessary, use a mild detergent.
NEVER USE ANY HARSH CLEANERS.
Soleplate :
Starch and other residue may be easily removed from the soleplate with a damp
cloth.
To avoid scratches the finishing, never use a metallic pad to clean the Soleplate,
and never place the iron on a rough surface. If synthetics are ironed at too high
temperature not only is the fabric usually ruined, but the iron Soleplate is often
covered with the melted remains of the synthetic fabric. The best way to remove
synthetic residue from the Soleplate is to heat the iron and to iron over an old
cotton rag.
During this process of dry steaming it is advised to use it over and old piece of
cloth.