Vivax DD-207 S, Instruction Manual

Page: 61 / 84

VIVAX
ENG
14
Tips for Keeping Food in the Unit
◆
Cooked meats/fishes should always be stored on a shelf above raw
meats/fishes to avoid bacterial transfer. Keep raw meats/fishes in a container
which is large enough to collect juices and cover it properly. Place the
container on the lowest shelf.
◆ Leave space around your food, to allow air to circulate inside the unit. Ensure
all parts of the unit are kept cool.
◆
To prevent transfer of favors and drying out, pack or cover the food
separately. Fruit and vegetables do not need to be wrapped.
◆ Always let pre-cooked food cool down before you put in the unit. This will help
to maintain the internal temperature of the unit.
◆
To prevent cold air escaping from the unit, try to limit the number of times you
open the door. We recommend that you only open the door when you need
to put food in or take food out.
Maintenance
Cleaning
Please unplug the Refrigerator for defrost and cleaning
Dusts behind the unit and on the ground shall be timely
cleaned to improve the cooling effect and energy saving.
The interior of the refrigerator should be cleaned regularly
to avoid odor. Soft towels or sponge dipped in water and
non-corrosive neutral detergents are suggested for
cleaning. The refrigerator shall be finally cleaned with
clean water and dry cloth. Open the door for natural drying
before the power is turned on.
◆
Remove all the shelves.
◆
Wipe the inside of the unit with a weak solution of bicarbonate soda and
then rinse with warm water using a “wrung-out” sponge or cloth. Wipe
completely dry before replacing the shelves and salad bin.
◆
Use a damp cloth to clean the exterior, and then wipe with a standard
furniture polish. Make sure that the door is closed to avoid the polish getting
on the magnetic door seal or inside the unit.
◆
The grille of the condenser at the back of the unit (if exist) and the
adjacent components can be vacuumed using a soft brush attachment.
Cleaning Tips
Condensation may appear on the outside of the unit. This may be due to a change
in room temperature. Wipe of any moisture residue. If the problem continues,
please contact a qualified technician for assistance.
Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as